I've heard of people seeing reduced video performance from this because without a display attached the GPU might not be active, a workaround for this could be called a "display dongle". We've seen macOS come with VNC screen sharing server and client for some time now so this may be an option to consider. It is trivial to use some screen sharing protocol to create a "software KVM switch". What is competing with this though are software solutions. I believe KVM switches have gained popularity with it becoming common for people to have more than one computer at home. It costs little to implement a KVM switch in a display so I expect this feature to become more common. My thinking is that implementing a KVM switch in a display like this is merely a matter of software in the display once they cover their bases on supporting old and new hardware with inputs for USB-C/DP, USB-B, HDMI, and an integrated USB hub to get a couple USB-A ports. The switching between inputs would be like a typical KVM switch with a press of a button on the display or a key macro on the keyboard. These displays will allow for a laptop (or the rare desktop with DisplayPort over USB-C) to plug into the USB-C port and then another computer (typically a desktop) to connect by USB-B and HDMI. If someone looking for a solution is not set on getting an Apple display then shopping for an alternative is an option. Dual displays or other various configurations could leave people wanting more.ĭisplays with USB-C input are still rare, and those I do see will often times have a KVM switch built into them. This would be useful for switching between two Macs that have Thunderbolt ports, USB-A keyboard and mouse, and a single HDMI display. I suspect this is popular among people with a laptop for work and a tower computer with a high end graphics card with USB-C for play, or just two laptops pressed into service as desktops. What I have seen are KVM switches with a USB-C connection to the computer but it has a built in dock of sorts that breaks that USB-C connection into USB-A and HDMI ports for keyboard, video, and mouse. I would also like to find a solution since USB-C ports are becoming more popular and more capable. It is not a true KVM, and needs a separate USB switch to change keyboard/mouse between Mac and PC.Īn interesting question even a year after it was posted. The brightness, camera, and speakers work from the Mac, but not the PC. I wound up settling on this USB-C switch, connected to my Mac by this USB-C cable and to my PC by this DisplayPort to USB-C cable. but not through any KVM or switch that I have found. Update : the Belkin cable arrived, and it does work perfectly from the PC to the Studio Display, including camera and speakers. Switching from Mac to PC was always fine, but PC to Mac would just leave the screen blank until the monitor was unplugged and plugged back in. I have read that you can resolve those things by ordering this Belkin cable that combines USB and DisplayPort into a single USB-C, but my cable is still on the way from China so I haven't been able to test it yet.įinally, a caveat: I was able to switch back and forth as much as I wanted between two Macs, or between one Mac and one iPad Pro, but I could never get it to work with one Mac and one PC's Nvidia GTX 3080 DisplayPort output. Only the video signal is transmitted, so no USB hub, no volume and brightness control from the computer, no speakers, and no webcam. I was able to switch an Apple Studio Display between a 14" MacBook Pro (M1 Max) and and a Mac Studio (M1 Ultra) using this CKL KVM, using two generic USB-C to DisplayPort cables from the Macs, and sending the output to the Studio Display with this bi-directional DisplayPort to USB-C cable. How to switch between two Macs and one Thunderbolt Display? The same question was asked for the older Apple Thunderbolt Display here: Some state they do not work with Apple or Thunderbolt devices. Some USB-C KVM switches do seem to exist, but I'm unsure if this new Apple Studio Display works with them properly. I'm unable to find any Thunderbolt 3 or 4 KVM switches. The switch should ideally pass along the monitor's speakers and webcam, along with any peripherals connected to its USB-C ports. I'm looking for something like the old VGA KVM switch below, but for USB-C, Thunderbolt, DisplayPort, or whatever else is needed for the new Apple Studio Display. Is there a KVM switch (Keyboard, Video, Mouse) switch capable of swapping between Macs connected to the Studio Display? How can I easily switch Macs connected to the Studio Display? The Studio Display does not offer input switching, and only one of the USB-C / Thunderbolt ports on the back is capable of connecting to the host computer. However, I use a personal Mac and a work Mac at the same desk.įrequently switching cables between the two Macs whenever I want to use the display would be annoying. I'm interested in buying the new 5K retina 2022 Apple Studio Display.
0 Comments
Leave a Reply. |